The choice of the right duct material to be used to convey corrosive chemical fumes is paramount in order to maintain safety, prevent corrosion and reduce maintenance costs in the industry. PP ducts, FRP ducts, PVC ducts, and special corrosion-resistant duct materials are often considered in chemical fume extraction processes.
In cases where we have chemical processing plants, electroplating industries, pharmaceutical production, laboratories and even acid handling industries, the choice of duct material needs to take into consideration the whole exhaust system design.
Using the wrong duct material leads to leakage, breakdown and ineffective extraction.
A cable tray is a structural system that helps in supporting and conveying electrical cables throughout buildings, industrial plants, factories, commercial establishments, and infrastructure construction projects.
Cable trays can be found mounted on walls, ceilings, structural members, cable channels, and equipment platforms.
These can be utilized for:
Different types of cable trays can be made from materials like GI, aluminum, stainless steel, and FRP.
Different cable tray designs provide different levels of ventilation, cable support, accessibility, and protection.
A ladder-type cable tray is made up of two side rails running longitudinally, with rungs spanning across these rails at regular intervals. The open design of the ladder-type cable tray provides ventilation and allows easy access for cable installation.
Characteristics of Ladder-Type Cable Tray
Uses
Merits
Ladder-type cable trays are usually preferred in installations where large cables, long routing, and cable ventilation/accessibility are required.
Demerits
There is less bottom surface support due to its open nature compared to solid-bottom cable trays. The use of the cable and cable tray should be determined based on specifications.
A perforated cable tray consists of a continuous base with many holes or perforations. These perforations ensure ventilation of the system and facilitate cable placement on the bottom of the tray.
Characteristics of Perforated Cable Trays
Applications
Advantages
Perforated cable trays combine cable support with ventilation. These can be used for installations where ladder trays might not work.
Disadvantages
Perforations in these trays do not provide any form of protection from dust, water, and contamination.
Continuous solid bottom cable trays have a base that does not have any holes for ventilation. They are employed in instances that require continuous cable support or minimum exposure to falling materials.
Characteristics
Continuous solid base.
Side walls for cable confinement.
Covers may be optional.
Continuous cable support base.
Application Areas
Instrumentation installations selected
Control cable installation
Industrial indoor cable installation
Instances requiring continuous cable support
Benefits
Solid bottom cable trays provide continuous support and can help reduce exposure to debris entering from below.
Limitations
Solid bottom trays have poor air circulation compared to ladder and perforated trays. Factors such as cable heat dissipation, water accumulation, and installation must be taken into consideration when selecting a tray.
Channel cable tray is a small-sized cable management structure that is commonly applied for smaller cable projects.
It consists of a small channel where a few cables are mounted and organized.
Properties
Uses
Benefits
Basket-type wire mesh cable tray is made from metal wire mesh structures through welding.
The wire mesh design offers good ventilation and flexible cable routing.
Features
Applications
Advantages
Basket-type wire mesh cable tray is widely used in those instances where flexibility, accessibility, and easy installation are required.
Disadvantages
It is not necessarily suitable for all kinds of industrial cable installations. This should be verified in terms of cable loading, wire mesh strength, support, and cable compatibility.
A one-rail cable tray has a central rail system, not two continuous side rails.
The way the cables are supported is determined by the particular tray used and the cable installations.
Features
Applications
Advantages
One rail cable tray allows more flexibility in certain installations where the design of the tray is suitable.
Disadvantages
The cables have to be arranged properly and supported in a proper way.
Cable trays are also classified according to the material used in manufacturing.
| Cable Tray Material | Common Applications | Key Consideration |
|---|---|---|
| GI Cable Tray | General industrial and commercial installations | Corrosion protection depends on coating and environment |
| Aluminium Cable Tray | Lightweight installations | Strength, corrosion environment, and electrical considerations |
| Stainless Steel Cable Tray | Selected corrosive or hygienic environments | Grade selection and chemical compatibility |
| FRP Cable Tray | Chemical plants, corrosive environments, outdoor installations | Resin, construction, load capacity, and fire performance |
| PVC Cable Tray | Selected lightweight cable management applications | Temperature and mechanical limitations |
FRP cable trays are fabricated with fiber reinforced plastic, utilizing fiberglass reinforcement with a polymer resin system.
They are commonly recommended in cases where corrosion resistance, light weight, and electrical non-conductivity are required.
The following comparison helps understand the differences between the three commonly used cable tray designs.
| Feature | Ladder Tray | Perforated Tray | Solid Bottom Tray |
|---|---|---|---|
| Construction | Side rails and rungs | Perforated base | Continuous base |
| Ventilation | High | Moderate to good | Limited |
| Bottom support | Discontinuous | Continuous with openings | Continuous |
| Cable accessibility | High | Good | Good |
| Heat dissipation | Generally good | Depends on openings and installation | Requires careful assessment |
| Typical use | Larger industrial cable routes | General industrial cable management | Applications requiring continuous support |
| Cover availability | Yes | Yes | Yes |
The selection should be based on cable requirements, installation conditions, tray loading, and applicable electrical standards.
Selecting a cable tray involves more than choosing between ladder and perforated designs.
Ascertain the type of cable used for the installation, such as:
Various types of cables have different requirements with regard to routing, separation, supporting, and installation.
Ascertain the quantity of cables, dimensions of cables, and total loading of cables.
Think about adding any additional cables in the future.
The tray loading needs to be compared with the manufacturer’s data and support span.
It should be evaluated whether the installation site will be:
The choice of material should take into account the real site conditions.
Ladder design is often preferred when large cable runs and ventilation are required.
Perforated design is often used when both continuous support and ventilation are needed.
Solid bottom design is chosen when certain applications need continuous support.
Channel design is used for small cable runs.
Usually, the cable tray dimensions consist of:
Selection of dimensions depends upon the number of cables and other factors.
The accessories for cable trays can include:
Accessories should be compatible with the selected cable tray material and configuration.
| Industry | Common Cable Tray Applications |
|---|---|
| Chemical Plants | Power and control cable routing in corrosive environments |
| Power Plants | Electrical distribution and equipment connections |
| Manufacturing | Machinery and production line cable management |
| Pharmaceutical | Process equipment and instrumentation routing |
| Water Treatment | Electrical and control cable installations |
| Infrastructure | Utility and electrical cable management |
| Commercial Buildings | Electrical and communication cable routing |
| Data Centres | Network and communication cable management |
FRP cable trays are particularly relevant in industrial environments where corrosion resistance and non-conductive construction are important considerations.
Here are some things you should not do when choosing cable trays:
Cable tray selection is essential for creating a reliable and organized electrical installation.
Cable trays are significant parts in industrial cable management due to their ability to route cables, support and access them.
There are six different kinds of cable trays, which are ladder, perforated, solid bottom, channel, wire mesh, and single rail types.
As regards corrosive industrial installations, FRP cable trays have many benefits, like corrosion resistance, light weight and electrical non-conductance.
Selection of cable trays should be made on the basis of cable type, load capacity, dimensions of the tray, installation conditions, material and supports.
Plastic Fabricators offers FRP cable trays for industrial use, like chemical industries, infrastructural and corrosive installations.
For special requirements of FRP cable trays, provide information about the required width, depth, length, cable loading and installation environment.
WhatsApp us