Skip to main content

Plastic Fabricators

PP Pall Ring vs PP Intalox Saddle: Which Is Better?

Comparison of PP Pall Ring with PP Intalox Saddle is often made during the choice of tower packing for scrubbers, absorbers, chemical industries and wastewater treatment. Both types of packing are polypropylene random packings that aim to improve the contact between the gas and liquid phases in a packed tower.

The key difference lies in the shape of packing: PP Pall Ring has the shape of an open cylinder with slots and ribs; PP Intalox Saddle has the shape of a curved saddle.

These features affect the distribution of liquid, gas flow paths, effective surface area and pressure drop.

In general, PP Pall Ring is recommended for general purpose applications, whereas PP Intalox Saddle should be considered when liquid distribution and effective contact of gas and liquid are important.

But the best packing is dependent on process conditions, tower design and performance requirements.

The following table provides a detailed comparison of PP Pall Ring and PP Intalox Saddle.

What Is a PP Pall Ring?

PP Pall Ring is a type of random tower packing made of polypropylene in an open cylindrical configuration with windows and ribs.

These internal openings permit the flow of gas and liquid through the packing, thus increasing the surface area available for contact.

Characteristics of PP Pall Ring

  • Open cylindrical configuration
  • Ribbed structure and internal openings
  • Several surfaces for gas-liquid contact
  • Random packing configuration
  • Polypropylene material which is light in weight
  • Appropriate for chemical environment

PP Pall Ring is widely used in absorption columns, gas scrubbers, stripping towers, and other similar applications.

Explore PP Pall Ring Tower Packing from Plastic Fabricators.

What Is PP Intalox Saddle?

PP Intalox Saddle is a polypropylene random packer made in a curved saddle form.

This design allows for open passages and surfaces for effective distribution of liquid on the packer.

Features of PP Intalox Saddle

  • Curved saddle construction
  • Gas passages
  • Designed surface for liquid distribution
  • Random packing
  • Polypropylene packer
  • Can be used for compatible absorption and scrubbing processes

PP Intalox Saddles can be analyzed for packed columns where gas-liquid contact and liquid distribution are important factors.

Explore PP Intalox Saddles from Plastic Fabricators.

PP Pall Ring vs PP Intalox Saddle: Key Differences

Parameter PP Pall Ring PP Intalox Saddle
Shape Open cylindrical ring Curved saddle
Internal Structure Windows and internal ribs Curved surfaces and open passages
Packing Type Random packing Random packing
Gas–Liquid Contact Multiple surfaces through ring structure Contact through curved surfaces
Liquid Distribution Depends on geometry and distribution system Saddle geometry can promote liquid spreading
Pressure Drop Depends on size and operating conditions Depends on size and operating conditions
Mass Transfer Depends on effective wetted area and hydraulics Depends on effective wetted area and hydraulics
Applications Absorption, scrubbing, stripping Absorption, scrubbing, chemical processing
Material Polypropylene Polypropylene
Selection Based on process requirements Based on process requirements

Important: This comparison describes general packing characteristics. It does not establish that one product always has lower pressure drop, higher efficiency, or greater capacity than the other.

1. Difference in Packing Geometry

The most striking feature differentiating PP Pall Ring from PP Intalox Saddle is their geometrical features.

Geometry of PP Pall Ring

Pall Rings feature an open cylindrical design with ribbing inside.

The presence of holes allows gas and liquid to flow through the packing material while ribbing creates extra surfaces for contacting.

Geometry of PP Intalox Saddle

Intalox Saddles are characterized by a curved saddle-shaped design.

The geometry ensures creation of open surfaces that can contribute to liquid distribution over the packing.

Why Is Geometry Important?

Packing geometry impacts the following parameters:

  • Gas flow resistance
  • Liquid distribution
  • Wetted surface area
  • Void space
  • Packing configuration
  • Hydraulic behavior

And many others, depending on the packing size and design.

2. PP Pall Ring vs PP Intalox Saddle: Pressure Drop

Pressure drop is one of the key factors while choosing tower packing.

Pressure drop means the reduction of gas pressure during its passage through the packed bed.

It directly affects the operating conditions of the blower or fan in the scrubbing system.

PP Pall Ring Pressure Drop

PP Pall Rings have open passages for the gas flow due to their cylindrical shape.

Depending on their dimensions, they may have good hydraulic performance for the gas-liquid contact.

PP Intalox Saddle Pressure Drop

PP Intalox Saddles also have open passages for gas flow.

Their curved shape affects the way of gas flow through the packed bed and interaction with liquid.

Which One Has Lower Pressure Drop?

There is no general answer.

Pressure drop is affected by:

  • Size of packing
  • Gas flow rate
  • Liquid flow rate
  • Tower diameter
  • Height of packing
  • Properties of liquid
  • Gas density
  • Packing condition

In order to make an exact comparison, the hydraulic characteristics for the certain sizes of packing should be analyzed.

3. PP Pall Ring vs PP Intalox Saddle: Mass Transfer Efficiency

Mass transfer is the phenomenon where a component transfers from the gas phase to the liquid phase.

In an industrial scrubber, mass transfer may consist of soluble gas components transferring from the gas phase to a scrubbing liquid phase.

Packing assists in this process in creating contacting surfaces for the two phases.

PP Pall Ring Mass Transfer

PP Pall Rings have many contacting surfaces created by the openings and ribs.

Its efficiency is dependent on the wetting capacity of the liquid and the distribution of the gas phase in the bed.

PP Intalox Saddle Mass Transfer

PP Intalox Saddles offer a curved contacting surface which might promote liquid distribution and gas-liquid contact.

Its efficiency is dependent on the packing arrangement, liquid distribution, and operating conditions.

Which Is More Efficient?

Efficiency of mass transfer can not be predicted based on the packing alone.

Critical aspects to consider include:

  • Wetted surface area
  • Liquid distribution
  • Gas distribution
  • Packing size
  • Height of packing
  • Gas and liquid loading
  • Fluid properties

Design of the tower using the appropriate packing could lead to effective performance.

4. PP Pall Ring vs PP Intalox Saddle: Liquid Distribution

Distribution of liquid plays a crucial role in efficient packing tower design.

Failure to distribute liquid evenly will result in inefficient wetting of some areas.

It leads to a decrease in the contacting surface area and uneven flow of gases.

PP Pall Ring

The shape of the Pall Ring allows for liquid distribution through the surfaces and openings.

Its efficiency greatly depends on how liquid is distributed at the top of the packed bed and tower configuration.

PP Intalox Saddle

The saddle shape of Intalox Saddle can assist in spreading of the liquid over the packing surfaces.

Nevertheless, liquid distribution must be performed properly using an appropriate distributor.

Neither packing type can compensate for inefficient liquid distribution system.

5. PP Pall Ring vs PP Intalox Saddle: Chemical Resistance

Both PP Pall Rings and PP Intalox Saddles are manufactured from polypropylene.

Polypropylene offers useful chemical resistance in many industrial applications, making it a common material for chemical processing and scrubbing equipment.

However, chemical resistance must be evaluated for the actual service.

Factor Why It Matters
Chemical Type Different chemicals affect PP differently
Concentration Higher concentrations may change compatibility
Temperature Chemical resistance can change with temperature
Exposure Duration Continuous exposure may differ from short contact
Impurities Additional components may affect material performance
Mechanical Stress Chemical exposure and loading may interact

Do not assume that every PP Pall Ring or PP Intalox Saddle is suitable for every acid, alkali, solvent, or industrial chemical.

Material compatibility should be confirmed before purchase.

6. PP Pall Ring vs PP Intalox Saddle: Applications

Both packing types can be considered for different industrial gas–liquid contacting applications.

Application PP Pall Ring PP Intalox Saddle
Chemical Scrubbers Suitable candidate Suitable candidate
Gas Absorption Towers Common packing option Common packing option
Industrial Fume Scrubbing Suitable where process conditions match Suitable where process conditions match
Chemical Processing Application-dependent Application-dependent
Wastewater Treatment May be used in compatible packed systems May be used in compatible packed systems
Gas–Liquid Contacting Used for contacting applications Used for contacting applications

The final selection depends on process requirements, operating conditions, and tower design.

7. PP Pall Ring vs PP Intalox Saddle: Which Is Better for a Scrubber?

In the case of scrubbers for industrial use, it is necessary to ensure effective gas-liquid contacting, as well as an acceptable pressure drop for the packing.

Select PP Pall Ring If:

  • A traditional random packing solution is needed.
  • PP Pall Ring design is already used within the process.
  • There is a need for proper balance of contacting and hydraulic properties.
  • Proper size and material specifications of the packing are available.
  • Replacement packing is needed for the Pall Ring packing bed.

Select PP Intalox Saddle If:

  • Saddle type of packing is preferred for the process.
  • Properties of liquid distribution and contacting should be evaluated.
  • The existing tower uses saddle packing.
  • Comparison of processes or packing is performed.
  • Suppliers have proper hydraulic data for the process requirements.

Prior to Choosing Any Packing

Verify:

  • Gas velocity
  • Liquid flow rate
  • Scrubbing agent
  • Temperature of operation
  • Tower diameter
  • Height of packing
  • Permissible pressure drop
  • Needed removal efficiency
  • Fouling properties

These factors are more important than choosing packing by name.

8. PP Pall Ring vs PP Intalox Saddle: Size Selection

Packing size affects the efficiency of a packed tower.

Small packing might give a large contacting area per unit volume but increases flow resistance and fouling problems.

Large packing gives more open passages but a smaller contacting area per unit volume.

Common Size Selection Criteria

PP Pall Rings and PP Intalox Saddles are available in various nominal sizes depending on the brand.

The common criteria for packing size selection are:

  • Tower diameter
  • Gas flow rate
  • Liquid flow rate
  • Contacting efficiency required
  • Pressure drop
  • Potential for fouling
  • Height of packing

Size of packing should never be selected purely from tower dimensions.

It should be selected by considering the actual gas and liquid loadings.

9. PP Pall Ring vs PP Intalox Saddle: Cost Comparison

The purchase cost of PP Pall Ring and PP Intalox Saddle depends on several factors.

Cost Factor Impact
Packing Size Different sizes have different material requirements
Quantity Bulk quantities may affect quotation
PP Material Grade Material specifications influence cost
Manufacturing Quality Product consistency and specifications matter
Packing Design Geometry and production requirements influence price
Delivery Location Transportation affects total project cost
Installation Labour and handling influence project cost

The lowest packing price does not always result in the lowest operating cost.

A suitable packing selection should consider performance, blower requirements, maintenance, replacement frequency, and lifecycle cost.

10. How to Select the Right PP Tower Packing

Use the following selection process before purchasing PP Pall Ring or PP Intalox Saddle.

Step 1: Determine Type of Operation

Check what the tower is intended for:

  • Gas absorption
  • Chemical scrubbing
  • Stripping
  • Or any other gas/liquid contact process

Step 2: Chemical Suitability

Check if polypropylene is compatible with the chemicals, their concentrations, temperatures, and environmental conditions.

Step 3: Gas and Liquid Loading

The packing has to be selected based on real gas and liquid flows in the tower.

Step 4: Allowable Pressure Drop

Check the allowable pressure drop through the packing bed.

In the case of industrial scrubbers it is especially critical to check pressure drop when choosing a blower.

Step 5: Packing Size Selection

Compare possible packing sizes to the tower diameter, hydraulic loading, and process specifications.

Step 6: Verify the Tower Internals

Check:

  • Liquid distributor
  • Packing support
  • Hold-down mechanism
  • Gas inlet arrangement
  • Demister
  • Accessibility for maintenance

Step 7: Check Supplier’s Specifications

Ask for dimensions, materials, packing amount, and other necessary information about packing.

In critical cases, packing choice has to be based on engineering calculation or hydraulic evaluation provided by the supplier.

Conclusion: PP Pall Ring vs PP Intalox Saddle

PP Pall Ring and PP Intalox Saddle are two effective forms of random packing that can be employed in gas-liquid contact processes.

Their main distinguishing feature is their shape:

PP Pall Ring: Open cylindrical form with ribs and slots inside.

PP Intalox Saddle: Saddle-shaped packing with open slots through which gases move.

Both types of packing material are not better by default in any application.

For scrubbers, absorbers, and chemical process plants, the choice should depend on pressure drop, mass transfer, liquid distribution, packing sizes, chemical resistance, and other parameters.

When choosing to construct a new scrubber or replace old tower packing, you need to compare the above-mentioned packing materials according to your needs before purchasing.

We at Plastic Fabricators provide industrial tower packing solutions made of polypropylene.

Explore our products:

For technical inquiry, please provide the following details: tower dimensions, gas flow rate, liquid flow rate, chemical composition, temperature, and packing needs to find the appropriate packing arrangement.