PP Ducting and FRP Ducting are extensively utilized in industries for industrial ventilation and chemical fume extraction applications. But then again, the best option would depend upon the kind of chemicals involved, operating temperature, mechanical demands, dimensions of the duct, and other factors related to its maintenance over time.
The reason why PP ducting is usually chosen for chemical fumes, acidic vapors, and other corrosive situations in industrial environments where polypropylene suits for the job. On the other hand, FRP Ducting is more suited for large-scale industrial ventilation and other applications that need customized structures.
Choosing the wrong material for your duct can result in various issues in the future.
Definition of Polypropylene Ducting, PP Ducting
PP ducting refers to thermoplastics ducting which is made of polypropylene material. PP ducting is extensively applicable for transportation of corrosive gases, chemical vapors, and exhaust fumes.
PP ducting is ideal for applications that need chemical resistance, light weight, and easy manufacturing.
However, polypropylene has temperature limitations.
FRP Ducting or Fibre Reinforced Plastic ducting is produced from a plastic resin which has been reinforced with glass fibers.
The blend of plastic and fiber results in a material which offers features such as corrosion resistance, strength, and design flexibility.
FRP Ducting is extensively used in ventilation systems which require handling of corrosive gas, fume or exhaust air.
FRP performance depends significantly on resin selection, laminate construction, reinforcement, fabrication quality, and operating conditions.
The following table compares PP and FRP ducting across important industrial selection parameters.
| Parameter | PP Ducting | FRP Ducting |
|---|---|---|
| Material | Polypropylene thermoplastic | Glass fibre reinforced polymer |
| Construction | Thermoplastic fabrication or welding | Composite laminate construction |
| Chemical resistance | Good for many corrosive chemicals | Depends on resin and laminate |
| Temperature capability | Limited by PP properties | Depends on resin system and design |
| Weight | Generally lightweight | Lightweight relative to many metals |
| Mechanical strength | Depends on thickness and fabrication | Can be engineered for higher structural requirements |
| Large diameter applications | Suitable with proper design | Often suitable for large engineered duct systems |
| Custom fabrication | Flexible thermoplastic fabrication | Extensive composite design flexibility |
| Maintenance | Depends on operating conditions | Depends on laminate and operating conditions |
| Typical applications | Chemical fumes, wet exhaust, corrosive ventilation | Large industrial exhaust and corrosive ventilation |
Important: Neither PP nor FRP ducting is universally superior. The correct material must be selected according to actual operating conditions and engineering requirements.
As regards chemical fume exhausts, either of PP and FRP ducting may be considered appropriate. This needs to take into consideration the chemicals used, their concentration levels, temperature conditions, and the overall design of the system.
Chemical resistance is one of the most critical criteria in the selection of industrial ducting.
PP is normally suitable for most acids and alkalis. FRP can also be highly resistant to corrosion with proper selection of the resin system and laminate.
Chemical resistance, however, is not dependent on the materials themselves.
The following must be taken into account:
In some cases, ducting for fumes of sulphuric acid will require a different material than that for other chemicals at high temperature.
Always verify chemical compatibility before finalising PP or FRP ducting for industrial applications.
Selecting the right ducting involves more than comparing PP and FRP materials.
Identify the type of chemicals being moved via the ducts.
Identify whether there is moisture, corrosive, particulate or condensable gases in the exhaust system.
Identify the working temperature, highest temperature and possible temperature variations.
PP and FRP have different temperature ranges and the temperature range depends on the material properties and working conditions.
The duct sizes are to be identified based on the required air flow, velocity and pressure drop.
Small duct sizes may result in high pressure drop and bad design will affect the extraction process.
Consider the following:
Industrial ducts must be chosen as part of the whole ventilation system.
Components of the system can include:
System compatibility and performance must be considered throughout the whole system.
Both PP and FRP ducts can be installed in the system of an industrial scrubber.
PP ducts may be used when there are compatible corrosive fumes and polypropylene scrubbers in the system.
The use of FRP ducts can be appropriate for large exhaust systems that require engineered composite ductwork.
It all depends on the scrubber discharge conditions, exhaust temperature, chemicals, airflow, etc.
Explore related products:
Industrial ducting selections that should be avoided:
Properly engineered ducts ensure reliability and extraction of gases, thus reducing unnecessary maintenance.
Both PP Ducting and FRP Ducting have certain benefits that are highly useful in ventilation of industries and chemical fume extraction.
PP ducting is a good solution for many corrosive exhaust systems, which require thermoplastic material. FRP ducting would be a good option for those systems that need composite construction and customized designs along with large exhaust systems for industries.
The material of the ducts is the one which suits your chemical environment and mechanical requirements along with temperature and flow rate.
Plastic Fabricators produces industrial plastic and FRP products for the chemical process, ventilation and exhaust systems.
If you need customized ducting solutions, please provide us with details about the chemicals, operating temperature, diameter of ducts, airflow and installation.
WhatsApp us